At a locksmith shop, key duplication usually involves choosing a matching blank, copying your original key’s cuts with a cutting machine, and smoothing and checking the copy. If you need a standard mechanical key, cutting and testing are usually enough. Many vehicle keys also need electronic programming before they can start your engine.
How does a locksmith choose the right key blank?
The locksmith first identifies your key type and checks its condition. A key blank is an uncut key with the right basic shape, length, thickness, and grooves to fit your lock’s keyway, the opening where you insert the key.
The right key blank matters just as much as the cuts. Two keys may look nearly identical but have different groove patterns or blade dimensions. Even with the right cuts, the wrong blank won’t give you a reliable copy.
The locksmith may use markings on your original key, a reference catalog, or measurements to identify the blank. They also check how the key lines up in the cutting machine. Some keys align at the shoulder near the bow, or head, while others align at the tip. If the key sits in the wrong position, every cut can shift along the blade.
How does a key-cutting machine copy your key?
For a typical edge-cut house key, the locksmith uses a duplicator with two vises, a guide, and a rotating cutter. The guide follows your original key while the cutter removes metal from the matching positions on the blank.
- The locksmith clamps your original key and the matching blank into separate vises.
- They align both keys using the appropriate shoulder or tip stop.
- The guide traces your original key’s peaks and valleys while the cutter shapes the blank.
- The locksmith removes sharp burrs and inspects the finished cuts.
- They compare the copy with your original and test it in the lock if you have it with you.
The depth of each cut positions the lock’s internal components so you can turn the plug. In a common pin-tumbler lock, the correct key aligns the gaps between the pin pairs at the shear line, the boundary where the plug turns inside the lock.
Some machines read your original key electronically and use a motor-controlled cutter instead of a manually guided tracing process. Both methods require accurate alignment, the right cutting tools, and a properly maintained machine to produce a reliable copy.
Do all keys use the same duplication process?
No. Your key’s blade design and electronic security features determine which equipment and authorization the locksmith needs. A shop that copies ordinary house keys may not have the machinery or access credentials to copy every specialized key.
- Standard edge-cut keys: A locksmith can copy many house, padlock, and older vehicle keys with a conventional duplicator.
- Sidewinder vehicle keys: Often called laser-cut keys, these have milled tracks. To copy one, your locksmith needs a compatible milling machine, not an actual laser.
- Dimple and other specialized keys: These have cuts in different locations or shapes, so your locksmith needs suitable cutters, fixtures, and blanks.
- Restricted-system keys: You may need an authorization card, approval from the system owner, or service through an authorized dealer.
- Transponder keys and smart keys: You may need electronic pairing or programming as well as any mechanical blade cutting.
Cutting is not programming. A copied vehicle blade may open your door but fail to start the engine if your vehicle doesn’t recognize its chip. The National Highway Traffic Safety Administration explains that immobilizing devices prevent a vehicle from starting without the required electronic authentication.
Ask the shop whether your quote includes the blade, transponder or remote, programming, and testing. Pairing the remote buttons and programming the immobilizer aren’t always the same procedure.
Can a locksmith duplicate a worn or broken key?
A duplicator generally copies the shape it follows, including wear. If you already have to jiggle your key or pull it out slightly to turn it, a copy may repeat the problem rather than solve it.
Bring your least-worn working key instead of a heavily used copy. Tell the locksmith if your key sticks, feels rough during insertion, or doesn’t turn reliably before they start cutting. A damaged lock can cause similar symptoms, so a new key isn’t always the repair you need.
Depending on your key system, the locksmith may decode the cuts and cut a replacement to the manufacturer’s specified dimensions instead of tracing worn edges. If your key is broken, bring all the pieces. They may provide enough information to make a copy, but missing or distorted sections can make straightforward duplication impossible.
How long does key duplication take?
You can often get a straightforward house-key copy in just a few minutes once the locksmith starts work, provided they have the blank in stock. You may wait longer if the shop is busy, your key needs an unusual blank, your original is worn, or the cutting process requires specialized equipment.
If your vehicle key needs programming, expect the job to take considerably longer. Your vehicle, the working keys you have, the security access procedure, and the shop’s equipment compatibility all affect how long you’ll wait. Ask whether you need to bring your vehicle before heading to the shop.
You’ll generally pay much less for a basic mechanical copy than for a vehicle key with a remote. Request the total price before work starts, including the blank, cutting, programming, and any separate diagnostic or service charges.
What should you bring to the locksmith?
Bring the best original key you have and explain what it opens or starts. For vehicle keys or controlled key systems, ask beforehand about identification, proof of ownership, authorization documents, and whether you need to bring every working key you already have.
If practical, bring your portable padlock or removable lock cylinder so the locksmith can test the copy. Otherwise, test without forcing as soon as you return. Insert and remove the key, then turn it gently through the lock’s normal range of motion. Test a door lock with the door open first to reduce your risk of getting locked out.
If your duplicate catches or won’t turn, stop and return to the shop with both keys. For a vehicle key, check that you can start the engine, use the remote buttons, and operate the mechanical door lock before you consider the job complete.
Sources
- Vehicle Theft Prevention · NHTSA (nhtsa.gov)