Home

What Should You Do If a Key Breaks Inside a Lock?

If a key breaks inside a lock, stop turning it, save the remaining piece, and don't push anything into the keyway. You can gently pull out a fragment that sticks out far enough to grip, but call a locksmith if it's flush with the lock face, lodged deeper inside, or won't move.

What to do first when a key breaks in a lock

Take your hand off the key and check whether the door is open or locked. If it's open, keep it open until you've removed the fragment and tested the lock. Closing it could turn a repair into a lockout.

Check for an urgent safety problem before working on the lock. If someone faces immediate danger, such as a child trapped in a hot vehicle, call 911 immediately rather than trying to extract the key. 911.gov explains when to request emergency assistance.

If there's no emergency, take these first steps:

  • Save the key head and any loose fragments so a locksmith can inspect them.
  • Use a flashlight to see whether the broken end sticks out beyond the lock face.
  • Leave the cylinder in its current position rather than forcing it back with another tool.
  • Keep other people from inserting a spare key or trying to use the damaged lock.

If the key broke while you were turning it, the cylinder's plug, the rotating center where you insert the key, may be partly turned. In many pin-tumbler locks, that position can prevent you from pulling the fragment out. Don't try to turn it back with a screwdriver or the broken key head.

Can you remove a broken key yourself?

You can try carefully only if the fragment sticks out far enough for a firm grip, the lock isn't under strain, and you can reach it comfortably. If the fragment sits flush with the lock face, you'll usually need a dedicated extraction tool and experience using it.

You can use needle-nose pliers if their tips grip the exposed metal without entering the keyway. Tweezers help only if you can close their jaws around the fragment. Thick tips often push it farther inside instead.

Stop if the cylinder is partly turned, the fragment is bent, or the key jammed before breaking. You may not be able to release the piece with a straight pull under these conditions. Don't try improvised extraction methods on a vehicle ignition, since you could damage other components around the cylinder.

How to remove a broken key that sticks out

Use light, straight pulling pressure, not twisting or sideways force. Aim to slide the fragment out along the same path you'd follow when removing an intact key.

  1. Check the lock manufacturer's maintenance instructions. If the manufacturer recommends lubrication, apply only a small amount of a product approved for that cylinder.
  2. Grip the exposed fragment with fine needle-nose pliers, keeping the tool clear of the lock face.
  3. Pull gently, straight outward. Stop if the fragment won't move or the pliers begin slipping.
  4. Once you remove the fragment, place both pieces together for inspection, but don't insert the broken key again.

Don't assume graphite, silicone, or a general-purpose spray suits every lock. Some cylinders require a specific lubricant, and mixing products can leave residue that interferes with the lock's operation. Lubricant also won't straighten a bent key or repair damaged internal parts.

If a gentle attempt doesn't work, stop. Repeated gripping can flatten or chip the exposed end, leaving a locksmith less metal to grip.

What not to put into the lock

Never use superglue to reconnect the pieces inside the cylinder. Adhesive can spread onto pins and other moving parts, leaving you with a cylinder to replace instead of a fragment to remove.

Don't insert a spare key behind the fragment. It won't let you operate the lock normally and may push the broken piece deeper. Avoid probing with paper clips, needles, knife tips, or improvised saw blades, which can bend, snap, or damage the keyway.

Don't drill the lock or hammer the fragment inward. Drilling destroys components, and you may not need it if a locksmith can extract the piece without replacing the cylinder.

When to call a locksmith for a broken key

Call a locksmith if you can't grip the fragment, the cylinder is partly turned, or a gentle pull fails. Also get professional help if you already had trouble operating the lock, since removing the key may not fix the original problem.

A locksmith can use a broken-key extractor to grip the fragment and pull it out. Depending on the cylinder and how easily the locksmith can reach it, they may need to remove or disassemble it. You may not need a replacement cylinder; that depends on the lock's condition.

Ask for an estimate that lists separate charges for the service call, extraction, and any proposed parts. Explain whether the door is open, whether you can see the fragment, and whether the lock was stiff before the break. Before authorizing replacement, ask what damage makes it necessary.

What to do after removing a broken key

A locksmith may be able to make a replacement from the broken pieces if they can read enough of the original cuts. You may get a better replacement by providing an undamaged spare or an authorized key code. Keep every fragment, but don't glue them together.

For a vehicle key, you may need more than a replacement blade. You may also need to have a replacement transponder or remote-head key programmed, depending on which components you keep and your vehicle's requirements.

Test with the door open after removing the fragment, using an undamaged key. If the key still binds, stop forcing it and have a locksmith check the cylinder. If you can turn the key easily with the door open but not when it's closed, you may have a bolt or strike alignment problem rather than a key problem.

Replace keys that are bent, cracked near the shoulder, or noticeably worn. Never use a key to pull a door shut, and find out why a lock has become harder to turn before another key breaks.

Sources